Oxygen gas is most important gas  in many sectors. Incorrect use, storage and transport of oxygen gas, which is common, may result in damages and even accidents, sometimes death. Today, oxygen is supplied as liquid in a tank and filling tube. Liquid oxygen issupplied by means of transporting pressurized cylinders or by filling into large storage tanksin the area to be used. Transport with large, heavy and pressurized tubes is risky.

Oxygen cylinders are dangerous because they are high pressure, and have the potential to burn and explode.

Expensive: Transportation is carried out only through but the road and seasonal conditions may be risky and increase the costs, as well as labor costs.

Dangerous: There is no leakage warning in the tubes. Liquid oxygen and cylinders are explosive. They are stored in pressurized tubes by compression. Explosion in the event of contact with flammable substances (oil, etc.) may have fatal consequences.

High Losses: 20% to 30% losses are observed in liquid oxygen in tubes and tanks due to temperature changes.ubes and tanks due to temperature changes.

In addition to these OXYGOLD (Medical Oxygen Production and Storage System) is:



No transport, shipping required; produces oxygen up to 95% (± 3%) purity.

With the medical oxygen system you can produce your own oxygen. Our air compressor, togeth- er with the refrigerated dryer and filtration system, takes the air and separates it from other gases with nanotechnology. This separation is carried out with a synthetic zeolite material which does not need to be replaced. The processis completely automated, which makes itreliable and virtually maintenance-free. The medical oxygen production and storage system, which an average hospital needs, is able to amortize itself in approximately one year when compared to liquid oxygen and cylinders. With the money you will pay for liquid oxygen and tubes in a year, you will be free for many years and you will have oxygen free at the purity rates you want.



High quality medical filters are used.

Medical Oxygen Production and Storage Systems works at 4-6 Bar pressure, fully automated, reliable.